Rain Bird Irrigation controller with flow module 230VAC white type ESP-2 Wire
Product number: 7038525
Manuals & drawings
Frequently bought together
Technical details
-
Thickness11.2 mm
-
Height19.5 mm
-
Colourwhite
-
IP valueIPX4
-
TypeESP-2 Wire
-
Voltage230VAC
-
EAN4019305778688
-
Part number7038525
-
ManufacturerRain Bird
Similar products
Product description
50-station capacity as standard without the need for expansion modules
Compatible with standard direct burial irrigation wire and standard irrigation wire connectors
Decoder Auto-Address to detect and assign decoder addresses to stations automatically
Supports up to two 2-wire paths
Diagnostic LEDs on the back plane and on each 2W-1 Decoder for advanced troubleshooting
4 available programs, with up to 6 start times for each program, to meet the needs of varied landscapes
One-touch manual watering capability for ease of use
Large back-lit LCD display for improved visibility in low-light and direct sun conditions
Contractor Default™ allows you to easily save and restore your custom schedule
Delay watering by up to 14 days and automatically resume watering after the set delay has elapsed
Bypass rain sensor for any station gives you the ability to customise which stations react to a rain sensor
Seasonal Adjust by program allows you to easily reduce or increase watering by program
Upgradeable for WiFi-based remote monitoring and control via iOS and Android mobile devices (with LNK2 WiFi Module sold separately)
Internet-based weather information can be used to make daily adjustments to the irrigation schedule, saving up to 30% in water (with LNK2 WiFi Module sold separately)
Set Permanent Days Off per program to ensure watering never occurs on days when maintenance crews are on site (for Odd/Even/ Cyclic schedules)
Easy to install indoors or outdoors with pre-installed power cord