Tavlit Automatisk filterstation fiberglasförstärkt nylon 2" 10bar 105mikron disk 9-12VDC latch svart type TVDSA Stand Alone
Artikelnummer 7031300
Manualer & ritningar
Alla visade priser är exklusive moms. Logga in eller kontakta försäljningen för anpassade priser.
Pris ex. moms
79 520,87 kr / 1 st
79 520,87 kr / st
Pris momsfri
79 520,87 kr / 1 st
79 520,87 kr / st
2 i lager i Veghel, NL
- minsta leveranstid: 3-5 arbetsdag(ar)
Ofta köpta tillsammans
7033257
Azud In-Line filter plast 1" utvändig gänga 8bar 130mikron disk svart type Modular 100
Subscription
150,14 kr
7028556
Tavlit Manuellt filter PP 1" invändig gänga 10bar 200mikron polyester mask svart type Eitan
Subscription
165,12 kr
7021524
Rain Bird In-Line filter PP 2" utvändig gänga 8bar 130mikron disk svart type ILCRBY200D
Subscription
687,94 kr
Tekniska detaljer
-
PackningsmaterialEPDM
-
Tryck10 bar
-
Volt9-12VDC latch
-
Filtrering105 mikron
-
Material filterelementdisk
-
Materialfiberglasförstärkt nylon
-
Färgsvart
-
Kapacitet20 m³/h
-
TypStand Alone
-
Filteryta1100 m²
-
Backspolnings flow rate6,5 m³/h
-
Längd1050 mm
-
Storlek2"
-
TypTVDSA
-
EAN4019305730082
-
Artikelnummer7031300
-
TillverkareTavlit
Produkt beskrivning
TVD patented automatic disc filtration saves water and energy by using air as well as water in the flushing process.
The venturi devices that are inserted at the spine's inlets introduce air during the flushing process to enhance it.
The mixture of air and water enables a more efficient and shorter flushing, therefore saving water, enabling flushing at a low pressure of 1.5 bar and a shortening of the flushing time.
The use of air also cushions the discs, thereby reducing friction and prolonging the life of the disc element.
When the head loss reaches a preset value of 0.5b-0.7b, the controller will start flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing the flow to the field is uninterrupted.
Minimum flushing pressure required: 1.5bar.
Flushing flow rate at 1.5bar: 6.5m3/h.
The venturi devices that are inserted at the spine's inlets introduce air during the flushing process to enhance it.
The mixture of air and water enables a more efficient and shorter flushing, therefore saving water, enabling flushing at a low pressure of 1.5 bar and a shortening of the flushing time.
The use of air also cushions the discs, thereby reducing friction and prolonging the life of the disc element.
When the head loss reaches a preset value of 0.5b-0.7b, the controller will start flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing the flow to the field is uninterrupted.
Minimum flushing pressure required: 1.5bar.
Flushing flow rate at 1.5bar: 6.5m3/h.
Liknande produkter
