Everything required for your complete irrigation system

Hunter

View all Hunter products

Maximises water saving

Leading manufacturer of irrigation solutions

Wide product range

Hunter - your specialist in automatic sprinkler systems 

The leading manufacturer in irrigation

With over 30 years of experience, Hunter Industries is a leader in both residential and commercial irrigation, as well as outdoor lighting. Hunter is sold in more than 120 countries worldwide. In addition, Hunter is a leading manufacturer of irrigation solutions for agriculture, horticulture and industrial applications.

Hunter product groups

Hunter popular products

Hunter Markets

Hunter irrigation solutions for agriculture

Hunter’s agricultural products increase irrigation efficiency by focusing on optimal pressures and applying water with unparalleled uniformity. This approach significantly reduces runoff and allows for extremely precise irrigation, even in windy conditions or difficult terrain. Products are constructed from heavy-duty, field-proven materials, ensuring unmatched reliability and long, productive service life. 


From valves and controllers to sprinklers and micro-irrigation components, Hunter products maximise water savings and ensure vigorous, productive crops.

Solutions for agricultural irrigation

Hunter solutions for residential irrigation

Meeting solutions for all your water irrigation purposes for your residence. Hunter manufactures quality durable products that hardly need maintenance. Why work hard when you can work smart. Purchase from Hunter’s wide range of rotors, MP rotators, nozzles, and spray bodies. 


The drippers/emitters drop water directly towards the plant’s root to establish the ideal moisture level.

Solutions for residential irrigation

Hunter solutions for commercial irrigation

Hunter’s commercial irrigation products rule the industry in its reputation in quality, reliability, and innovative features found in its rotary sprinkler line, and continue to set the benchmark by which other manufacturers' products are judged. 


Hunter  has an array of revolutionary alternatives to traditional irrigation systems. The line-up offers a variety of user-friendly features and smart controller water-saving options built to fit any landscape irrigation system. For large-scale commercial landscapes, Hunter provides a variety of control options with cutting-edge advanced features that can keep any landscape green.

Solutions for commercial irrigation

Let Bevo find a solution to your water challenge and experience the convenience of Bevo as a total supplier

Ask our irrigation specialist

Why Hunter and Bevo have joined forces

Hunter's dedication to developing high-quality products with a view to saving water, time and money matches Bevo's values more than ever. It is for this reason that we decided to strengthen our partnership with Hunter and added more than 500 products to our range! 

Unique to this partnership is the rapid availability of the complete range of sprinklers, irrigation controllers, nozzles and drip hoses. You place your order…we deliver within days.

View the Hunter assortment

NEW from Hunter! FX Luminaire

FX Luminaire lighting is a new and unique addition to Hunter's extensive outdoor lighting range. This LED lighting not only has a beautiful design, but is also functional, durable and energy efficient.

The FX line is designed to be specified and installed by professionals, perfect for you!

View FX Luminaire

Need a spare part? Hunter provides this for you!

Besides the fact that Hunter is able to offer you complete systems, you can also purchase all parts individually. Hunter also has an extremely wide range of spare parts.

This means that you do not have to renew your entire system when a defect occurs, but instead purchase the defective part. This is good for the durability of your system, saves costs and is better for the environment!

View spare parts

Frequently asked questions

Do I have to regulate drip zones?

Drip zones require regulation since their working pressure is lower than that of any other system type. Hunter offers a 25 PSI and a 40 PSI version for pressure regulation. Any form of system that is not pressure compensating, point source using individual emitters, or utilising small supply tubing is suitable for the 25 PSI. The Hunter PLD inline emitter tubing is a pressure compensating system that the 40 PSI system is intended for. Pressure delivered between 15 and 50 PSI is compensated for by PLD emitters. By lowering the pressure to a level the emitters can take, the 40 PSI regulator ensures long-term performance.

What should I do when my MP rotator is not covering the distance?

The incoming pressure determines the MP Rotator's coverage radius. Check the incoming water pressure at the sprinkler head if you are not getting the desired coverage. To maintain 30 psi (2.07 bars/206.84 KPa) at the MP Rotator nozzle for tight radius options, use the Pro Spray PRS30 (PROS-PRS30). To maintain 40 psi (2.76 bars/275.8 KPa) at the MP Rotator nozzle and for optimum performance and range, use the Pro Spray PRS40 (PROS-PRS40).

Why does my sprinkler leak water but the system is turned off?

When the lowest head on a zone permits water to flow from the lateral pipework and out of the sprinkler, this is known as "low head drainage." If the system has a low head drainage, any remaining water will stop flowing until it has completely exited the pipe. Water escaping through the zone valve could be the secondary cause (a check valve in the sprinkler will not fix this leak). Debris blocking the valve's diaphragm is the most frequent cause of water leaks through valves.

How do I adjust the arc on my Hunter rotor?

Your rotor can be adjusted in two ways: the arc and the radius. The arc adjustment is in charge of changing the rotational pattern the head will cover. The factory setting and minimum arc on a Hunter rotor is 40 degrees (50 degrees for PGP-Ultra and I-20), and the maximum is a full 360 degrees. Using a Hunter adjustment wrench is the simplest way to make adjustments to your Hunter rotor. This tool is available at Bosta.

What are the advantages of including a rain sensor in my irrigation system?

Even if a sensor is not necessary, having one on your system is a good idea. They contribute to water conservation by interrupting any automatic cycles that are set up after a sufficient amount of rain has fallen. This not only saves money, but it also ensures that plants are not overwatered.

How do I choose the right emitter spacing and flow rate, and the correct row spacing for my landscape irrigation system?

Soil TypeSandLoamClay

Emitter Distribution

Saturated Rate (in./hr.)

.75 - 1.25

.25 - .75

.15 - .25

Diameter Coverage (ft.)

1 - 3 ft.

2 - 4 ft.

3 - 6 ft.

Available Water (in./ft.)

1.4

2

2.5

Frequently asked questions

Drip zones require regulation since their working pressure is lower than that of any other system type. Hunter offers a 25 PSI and a 40 PSI version for pressure regulation. Any form of system that is not pressure compensating, point source using individual emitters, or utilising small supply tubing is suitable for the 25 PSI. The Hunter PLD inline emitter tubing is a pressure compensating system that the 40 PSI system is intended for. Pressure delivered between 15 and 50 PSI is compensated for by PLD emitters. By lowering the pressure to a level the emitters can take, the 40 PSI regulator ensures long-term performance.
The incoming pressure determines the MP Rotator's coverage radius. Check the incoming water pressure at the sprinkler head if you are not getting the desired coverage. To maintain 30 psi (2.07 bars/206.84 KPa) at the MP Rotator nozzle for tight radius options, use the Pro Spray PRS30 (PROS-PRS30). To maintain 40 psi (2.76 bars/275.8 KPa) at the MP Rotator nozzle and for optimum performance and range, use the Pro Spray PRS40 (PROS-PRS40).
When the lowest head on a zone permits water to flow from the lateral pipework and out of the sprinkler, this is known as "low head drainage." If the system has a low head drainage, any remaining water will stop flowing until it has completely exited the pipe. Water escaping through the zone valve could be the secondary cause (a check valve in the sprinkler will not fix this leak). Debris blocking the valve's diaphragm is the most frequent cause of water leaks through valves.
Your rotor can be adjusted in two ways: the arc and the radius. The arc adjustment is in charge of changing the rotational pattern the head will cover. The factory setting and minimum arc on a Hunter rotor is 40 degrees (50 degrees for PGP-Ultra and I-20), and the maximum is a full 360 degrees. Using a Hunter adjustment wrench is the simplest way to make adjustments to your Hunter rotor. This tool is available at Bosta.
Even if a sensor is not necessary, having one on your system is a good idea. They contribute to water conservation by interrupting any automatic cycles that are set up after a sufficient amount of rain has fallen. This not only saves money, but it also ensures that plants are not overwatered.
Soil TypeSandLoamClay

Emitter Distribution

Saturated Rate (in./hr.)

.75 - 1.25

.25 - .75

.15 - .25

Diameter Coverage (ft.)

1 - 3 ft.

2 - 4 ft.

3 - 6 ft.

Available Water (in./ft.)

1.4

2

2.5