Hunter Remote control 24VAC type ROAM ROAM-KIT-XL

Hunter’s Roam remote control Now it won’t take an entire morning or afternoon to prepare your irrigation system for a new season. And there’s no more need to tramp for miles just to turn the installation on or off either. The Hunter Roam remote control allows you to start or stop the irrigation from a distance. Treat yourself to this luxury. Let’s look at the advantages. Practical and quick. This remote control has a range of up to 300 metres from the controller and fits into the pocket of your coat or jeans. Replace the miles you usually have to walk to switch the installation on or off by a smaller, more leisurely route. The Roam has a low-energy flat screen and easy-to-use keyboard. The Roam can be used with all Hunter AC-powered controllers, i.e. the Hunter X-Core®, X2 ™, Pro-C®, HPC, ICC2, HCC, I-Core®, ACC and ACC2 controllers. Specifications of the Hunter Roam - LCD screen - Remote control for projects of all sizes - Start up individual stations or programs manually for quick maintenance checks. - Adjust the settings on the Roam so that it only responds within the zones you have selected. In other words, you can use several remote controls for the same project without any worries and avoid cross-communication. - Programmable running times from 1 to 90 minutes, that do not exceed the usual, automatic programs. - Manual operation of up to 240 stations for flexibility for large projects. Ask any one of our specialists about using the Roam.