Submersible pump plastic 1" x 1 1/4" male thread 2,4A 230VAC blue IPC 550 type IPC Flat suction
Product information
For clean water only. Max. immersion depth: 7 metres.
Built-in non return valve with 3 adaptors for different connections.
Comes with a cooling jacket so they can be partially submerged.
Pumping can start when the water level is above 5mm. After removing the suction filter, water can be pumped until 1mm.
Installation: vertical, fixed or portable.
Operation: selection (1) Automatic or (2) Manual operating mode.
10 mtr cable and DIN plug
| Material impeller 1 | noryl |
|---|---|
| IP value | IP68 |
| Material seal | carbon/ceramic |
| Max. temperature | 35 °C |
| Shaft | stainless steel 304 |
| Size | 1" x 1 1/4" |
| Type | IPC |
| Ampere | 2,4 A |
| Connection | male thread |
| Float | not included |
| Max flow rate | 6 m³/h |
| Power | 0.55 kW |
| Voltage | 230VAC |
| Output Power | 0,73 HP |