Tavlit Automatisk filterstation fiberglasförstärkt nylon DN90 fläns 10bar 100mikron DN90 disk 9-12VDC latch svart PN10 2 x 2" filter type TAD
Artikelnummer 7028571Manualer & ritningar
Välj din produkt nedan eller beställ direkt via
komplett produkttabell
Alla visade priser är exklusive moms. Logga in eller kontakta försäljningen för anpassade priser.
Pris ex. moms
128 322,02 kr / 1 st
128 322,02 kr / st
Pris momsfri
128 322,02 kr / 1 st
128 322,02 kr / st
4 i lager i Veghel, NL
- minsta leveranstid: 3-5 arbetsdag(ar)
Tekniska detaljer
-
DN90
-
Längd750 mm
-
Filtrering140 mesh
-
PackningsmaterialEPDM
-
Max temp.60 °C
-
Filteryta2.2 m²
-
Tryck10 bar
-
Volt9-12VDC latch
-
Material filterelementdisk
-
Materialfiberglasförstärkt nylon
-
Filtrering100 mikron
-
Färgsvart
-
TypTAD
-
Anslutningfläns
-
Kapacitet40 m³/h
-
Min. temp.0 °C
-
FlänsPN10
-
EAN4019305710152
-
Artikelnummer7028571
-
TillverkareTavlit
Produkt beskrivning
TAD automatic disc filtration station.
When the head loss reaches a preset value of 0.5b-0.7b, the controller starts flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2.5bar.
Flushing flow rate: 9.3m3/h.
Components: Talgil controller, Bermad backflush valves and PE manifolds.
Configuration: Parallel with downstream (outlet) on the opposite side of the upstream (inlet).
For special configurations or components please contact us.
When the head loss reaches a preset value of 0.5b-0.7b, the controller starts flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2.5bar.
Flushing flow rate: 9.3m3/h.
Components: Talgil controller, Bermad backflush valves and PE manifolds.
Configuration: Parallel with downstream (outlet) on the opposite side of the upstream (inlet).
For special configurations or components please contact us.