Tavlit Automatisk filterstation fiberglasförstärkt nylon DN110 fläns 10bar 100mikron DN110 disk 9-12VDC latch svart PN10 3 x 2" filter type TAD
Artikelnummer 7028572Manualer & ritningar
Välj din produkt nedan eller beställ direkt via
komplett produkttabell
Alla visade priser är exklusive moms. Logga in eller kontakta försäljningen för anpassade priser.
Pris ex. moms
181 830,28 kr / 1 st
181 830,28 kr / st
Pris momsfri
181 830,28 kr / 1 st
181 830,28 kr / st
2 i lager i Veghel, NL
- minsta leveranstid: 3-5 arbetsdag(ar)
Tekniska detaljer
-
Filtrering140 mesh
-
PackningsmaterialEPDM
-
Max temp.60 °C
-
Tryck10 bar
-
Volt9-12VDC latch
-
Material filterelementdisk
-
Materialfiberglasförstärkt nylon
-
Filtrering100 mikron
-
Färgsvart
-
DN110
-
TypTAD
-
Anslutningfläns
-
Längd1100 mm
-
Filteryta3.3 m²
-
Min. temp.0 °C
-
Kapacitet60 m³/h
-
FlänsPN10
-
EAN4019305710169
-
Artikelnummer7028572
-
TillverkareTavlit
Produkt beskrivning
TAD automatic disc filtration station.
When the head loss reaches a preset value of 0.5b-0.7b, the controller starts flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2.5bar.
Flushing flow rate: 9.3m3/h.
Components: Talgil controller, Bermad backflush valves and PE manifolds.
Configuration: Parallel with downstream (outlet) on the opposite side of the upstream (inlet).
For special configurations or components please contact us.
When the head loss reaches a preset value of 0.5b-0.7b, the controller starts flushing one filter after the other.
Flushing cycle will take from 12 to 30 seconds, depending on the dirt load.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2.5bar.
Flushing flow rate: 9.3m3/h.
Components: Talgil controller, Bermad backflush valves and PE manifolds.
Configuration: Parallel with downstream (outlet) on the opposite side of the upstream (inlet).
For special configurations or components please contact us.